The IPX5/6 Handheld Jet Nozzle is designed and manufactured according to IEC60529 clause 14.2.5 and clause 14.2.6, used to verify protection against water into the second feature of 5/6 of the digital electronic and electrical products. The IPX5 and IPX6 nozzles are easy to be switched during use.
The device needs to configure a support table (speed of 1RPM), a high power pump, two high precision flowmeter, in order
to ensure the stability and accuracy of the test of water flow.
Working principle:
The test device simulates that when the test samples suffer water flow as 12.5 +0.625L/min or 100 + 5 L/min in a certain period
of time, thus to verify the waterproof performance of the sample’s enclosure.
The test time is calculated according to the sample surface area: 1min/m², but the short test time is not less than 3min.
Technical parameters:
|
No. |
Item |
IPX5 |
IPX6 |
|
1 |
Water supply |
Water flow rate ＞ 12.5L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment |
Water flow rate ＞100L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment |
|
2 |
The nozzle diameter |
Ф6.3mm |
Ф12.5mm |
|
3 |
Water flow |
12.5±0.625L/min,Flow meter is adjustable |
100±5 L/min,Flow meter is adjustable |
|
4 |
The distance from jet nozzle to enclosure |
2.5~3m |
2.5~3m |
|
5 |
Testing time |
Not less than 1min/m²(not less than 3 mins) |
Not less than 1min/m²(not less than 3mins) |
|
6 |
Pressure gauge |
0~0.25MPa |
0~0.25MPa |
|
7 |
Site requirements |
Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation |
Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation |
Contact: Eason Wang
Phone: +86-13751010017
E-mail: sales@china-gauges.com
Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China
Nina She